issues
search
GrandK
/
megapirateng
Automatically exported from code.google.com/p/megapirateng
0
stars
0
forks
source link
issues
Newest
Newest
Most commented
Recently updated
Oldest
Least commented
Least recently updated
i coded megapirate 2560 with megapirateNG 2.8 r3.i connected with mission planner everything is working properly.But if i connect battery esc will start beep not able to arm
#71
GoogleCodeExporter
opened
8 years ago
0
Camera Gimbal on MegaPirateNG 3.0.1 not working
#70
GoogleCodeExporter
opened
8 years ago
1
APM_HAL
#69
GoogleCodeExporter
opened
8 years ago
10
Sonar at Mission Planner CLI works but not appearing in flight data
#68
GoogleCodeExporter
closed
8 years ago
1
Camer trigger functionality not working in airplane mode (Cruis aiop board)
#67
GoogleCodeExporter
opened
8 years ago
0
ArduPlaneNG on Crius AIO Pro v.2
#66
GoogleCodeExporter
opened
8 years ago
2
Greatly appreciate for all the good work the MegaPirateNG team has contributed
#65
GoogleCodeExporter
closed
8 years ago
1
px4flow sensor port/support
#64
GoogleCodeExporter
closed
8 years ago
2
Are you there Alex?
#63
GoogleCodeExporter
closed
8 years ago
3
How do i clone the repository?
#62
GoogleCodeExporter
closed
8 years ago
2
Sonar Readings wrong
#61
GoogleCodeExporter
opened
8 years ago
3
Joystick Control doesn´t work
#60
GoogleCodeExporter
opened
8 years ago
1
loiter problems since using 4s LiPo's
#59
GoogleCodeExporter
opened
8 years ago
3
Unable to connect MP to Megapirate via 3DR radios.
#58
GoogleCodeExporter
opened
8 years ago
7
THANK YOU !!!!
#57
GoogleCodeExporter
opened
8 years ago
1
Elevator/Pitch Channel non responsive when loaded on HK Multiwii & Megapirate AIO board
#56
GoogleCodeExporter
opened
8 years ago
0
GPS shows location in multiwii and megapirate but aircraft wont function.
#55
GoogleCodeExporter
opened
8 years ago
0
Supports different types of models
#54
GoogleCodeExporter
opened
8 years ago
0
Accelerometer Calibration r303
#53
GoogleCodeExporter
closed
8 years ago
11
THR_Max does not work.
#52
GoogleCodeExporter
opened
8 years ago
0
[patch] GPS, Baro:add constructor initialization list
#51
GoogleCodeExporter
opened
8 years ago
0
[patch] LeadFilter: remove circular #include
#50
GoogleCodeExporter
closed
8 years ago
2
[patch] I2C, RangeFinder add constructor initialization list
#49
GoogleCodeExporter
closed
8 years ago
1
[patch] Compass: remove circular #include
#48
GoogleCodeExporter
closed
8 years ago
2
[patch] DataFlash: remove circular #include, add constructor initialization list
#47
GoogleCodeExporter
closed
8 years ago
1
Alt Hold in Megapirate V2.9 r300 keeps climbing
#46
GoogleCodeExporter
opened
8 years ago
21
Motors Disarm shortly after Arm / Takeoff in r299
#45
GoogleCodeExporter
closed
8 years ago
5
trimming changes after yaw
#44
GoogleCodeExporter
opened
8 years ago
1
Channel 6 pid tuning stopped working in 2.9 rev289
#43
GoogleCodeExporter
opened
8 years ago
5
Please include OptFlow Sensor code in MPNG /beta
#42
GoogleCodeExporter
opened
8 years ago
2
Unable to build MPNG from /beta on Linux using make
#41
GoogleCodeExporter
opened
8 years ago
11
2.9R6 Arming problem with 3DR radio
#40
GoogleCodeExporter
opened
8 years ago
3
Gimbal outputs don't work
#39
GoogleCodeExporter
closed
8 years ago
2
Disarming when flying in stab mode!
#38
GoogleCodeExporter
opened
8 years ago
143
PPM Error Meesage
#37
GoogleCodeExporter
closed
8 years ago
3
Improving FRSKY Telemetry (Open9x - firmware) with MegapirateNG
#36
GoogleCodeExporter
opened
8 years ago
2
Sonar stop working after upgrade to MegaPirateNG V2.9 R6
#35
GoogleCodeExporter
closed
8 years ago
1
Loiter Issues update
#34
GoogleCodeExporter
opened
8 years ago
1
FRSKY PPM channel 1 reseting to center.
#33
GoogleCodeExporter
opened
8 years ago
2
2.9 R5 BMP085 negative alt on FREEIMU.
#32
GoogleCodeExporter
opened
8 years ago
0
Camera Gimbal Jittery while Craft on ground with 2.9 rev5
#31
GoogleCodeExporter
closed
8 years ago
2
Crius AIO Tri Copter yaw servo not work MegaPirateNG
#30
GoogleCodeExporter
closed
8 years ago
11
LOITER
#29
GoogleCodeExporter
opened
8 years ago
0
Gimbal servo twitch
#28
GoogleCodeExporter
closed
8 years ago
6
controls freezed
#27
GoogleCodeExporter
opened
8 years ago
2
Fail with acc calibration
#26
GoogleCodeExporter
opened
8 years ago
5
Tri Copter yaw servo does not work MegaPirateNG_2.8_R3
#25
GoogleCodeExporter
opened
8 years ago
5
mpNG 2.9 rev 173 -could not build using Arduino 1.03
#24
GoogleCodeExporter
closed
8 years ago
4
increased the throttle by itselfs and flip over
#23
GoogleCodeExporter
opened
8 years ago
5
cam stabilisation doesn´t work
#22
GoogleCodeExporter
closed
8 years ago
3
Next