-
Hello,
I have a technical issue with a PureThermal 3 + FLIR Lepton 2.5. However, I am not sure it comes from the PureThermal or the FLIR.
When plug-in the PureThermal 3 to any computer (tried R…
-
Hello, I am trying to implement this code on my M5Stack Core. But my program is stuck on the "Calibrating..." page. I used a logic analyzer to capture the waveform of the VOSPI and it seems that the F…
-
https://www.digikey.com/en/products/detail/flir-lepton/500-0771-01/7606616
-
PIC32MZ DA supports a +3.0V VDDIO, and the FLIR lepton is limited to +3.0V IO. Consider consolidating these instead of having two supplies
-
I am using RPI4 with breakoutboard and trying to grab images using Lepton 3.5 using flirpy.
I am getting following error when I am trying to run example program capture_lepton.py
Please let me know …
-
I was following http://me.knnect.com/blog/how-to-connect-flir-lepton-module-to-nvidia-jetson-tk1/ to work on getting my Lepton working with my Jetson. Whenever I run the pylepton_capture, the program …
-
Hi,
I have wired Flir lepton 3 to Beaglebone black according to the description in beagleboneblack_video section. After running the demo code, the red square appears on the screen only. I detached …
-
hi @tomek-l is there a way to execute a FFC?, currently executing the code but the weather is fairly warm and is not working i need to execute an FFC.
thank you
-
do you know how to interface flir lepton 3.5 like your project face thermal measurement
-
Hi,
Thanks for you libraries.
Btw, I was testing my ESP32 with this setup pin:
```
ESP32 | FLIR LEPTON
3.3V | VIN
GND | GND
16 | CLK
19 | MISO
23 | MOSI
5…