-
I need to program some (older) FPGAs that are not included in the device list. I tried adding the devices to `device_list.txt` and I was able to detect it, but I was not able to assign the `-X paralle…
-
[OpenFPGALoader](https://github.com/trabucayre/openFPGALoader) is an universal FPGA programming tool which supports a variety of FPGA devices and programmers based on JTAG, DAP interface, ORBTrace, DF…
-
Hello! I was working in the FPGA - SDRAM Communication project. All was going fine up to the part of the U-boot programming.
In instruction # 4:
"""
Now we load the rbf file into memory and then …
-
I run caribou_dump1090 (drivers commits at Oct 2, 2023), but NO decode.
By using the same ANT, I can decode ADS-B by using dump1090-fa, RTLSDR.
```
$ caribou_dump1090
########################…
-
I am not clear if users can enable kernel SIMD vectorization and compute-unit duplication, which are available in Intel OpenCL SDK for FPGA, in the oneAPI FPGA flow.
Thanks
-
On a system with a whole lot of dumps (e.g. the gimlet from #1779, which has a `thermal` task that's crashed 7483 times), running `humility dump -l` can time out. When this occurs, I've seen the `hiff…
hawkw updated
1 month ago
-
Would be great to support key programming for the Lattice ECP5 (key is OTP and non-volatile).
In [ECP5 FPGA-TN-02202-1.7 ](https://www.latticesemi.com/view_document?document_id=39450) are some info…
-
Hi all,
I have issues to get my Cariboue lite running. If I run the cariboulite_util : `sudo ./cariboulite_util -c 1 -f 90600000 -n 100 -`
07-17 18:13:12.442 948 948 D CARIBOULITE Radio cari…
-
The Cypress FX2 to used for JTAG programming of the FPGA, so it needs to come up no matter what the FPGA is currently programmed with. Currently if the FPGA doesn't pull Cypress-RST net high or float …
-
Hi,
I came across your design as I am looking for a Ethernet design with UDP listener to be implemented on FPGA. I have a Alveo u50 card installed in my machine. I was able to generate the bitstrea…