-
hi guys,
i'm trying to sniff a 315mhz static code remote with NodeMCU v2 and MX-RM-5V module (version at 315) without success.
It seems that the NodeMCU don't found the board. I've used differen…
-
Thank you for putting together this project and sharing it! I implemented a slight alternative to this approach which is easier to solder (only did ON/OFF though, no dimmers): https://imgur.com/a/ZEIk…
-
Hello everyone, please tell me how to connect RFID-RC522 to M5Stick CPlus1.1. Also I would like to know about connecting FS1000A and card reader, is it possible to make it all work together (Rfid, FS1…
Kcual updated
1 month ago
-
### Board
Arduino Uno R3
### Hardware setup
FS1000A 433 MHz RF Transmitter Module
DS18B20
### Version
latest master (checkout manually)
### IDE Name
Arduino IDE 1.8.19 (Debian 12)
### Descrip…
-
if the SD card is missing store `config.conf` in littlefs, completely removing use of the EEPROM for settings.
(`bruce.conf` would be a better name btw)
should be implemented here:
https://githu…
-
## Equipement
I'm using an FS1000A transmitter & XY-MK-5V receiver to control the brennenstuhl RC CE1 4001 set
## Problem
Sniffing the controller's signal whilst repeatedly pressing the ON button…
-
Having some trouble getting it to receive... Send work like a charm...
Could it have something to do with:
https://forum.arduino.cc/t/setting-up-isr-for-adc-on-zero/655967/2
-
### The problem
Hi there, I have tried a lot of time, to fix this problem by myself
I have a Novy Hood and a Novy 840029 RF Controller.
I have flashed ESP-Home on my Sonoff RF Bridge and instal…
-
Hi so for the past week I've been using bruce 1.0.2 and here is the things that I've noticed
- rf module support and spectrum feature
I tried using it first with stx882 TX module and srt882s RX modu…
-
Hi,
First off, fantastic project, thank you very much!
I'm using a E07-M1101D with ESP Wroom 32, RTS blinds, radio is initialised, read remotes done and on the 2 blinds I did pair (after lots of t…