-
I am using **0.3.6**.
When I subscribe to `/RAMSES/GATEWAY/18:017804/rx`, I receive packets like so:
```json
{
"ts": "2024-02-07 08:12:00",
"msg": "000 RQ --- 18:017804 10:048122 --:------…
-
From [HA forum](https://community.home-assistant.io/t/honeywell-ch-dhw-via-rf-evohome-sundial-hometronics-chronotherm/151584/4217?u=zxdavb)
------------
Latest version, and I get this in the log…
-
Has anyone been able to communicate with the Honeywell Home T3R 7 Day RF Programmable Room Stat using RTL433 (or any other similar program using an SDR). To be specific I need to communicate with the …
-
On the ESP device, the very first message is not appearing on a new line because of a missing CR LF between the debug messages of the bootloader and the first message.
Also all subsequent messages …
-
Latest version, and I get this in the logs now:
```
/dev/serial/by-id/usb-FTDI_USB-RS232_Cable_FT5S4V48-if00-port0: the gateway type is not determinable, will assume evofw3, TIP: specify the serial …
-
I try to send a packet with the cli (evofw3):
```bash
sudo python3 client.py execute /dev/ttyUSB0 -x "RP 18:262143 21:033620 01FF 0080802727D0000000143C80800000B40080800280FF80040000"
```
And …
-
The payload validation for 0x1FF in ramses_rf is:
```python
Code._01FF: { # unknown_01ff, TODO: definitely a real code, Itho Spider
SZ_NAME: "message_01ff",
I_: r"^0[01][0-9A-F]…
-
> I can’t get the `send_packet` service to work with any of the 0.30.x versions.
>
> I’m trying to send a packet to turn on/off the BDR relay, using the example from the GitHub wiki, which was worki…
-
I have a problem that I do not receive the following packets in the packet.log and not in ramses_cc_message event, but they are received by the HGI80.
```log
045 RQ --- 21:033618 21:033618 --:----…
-
Hi,
Since a few weeks I have a problem with 1 zone (all other 8 are working perfect)
This zone in working correctly in Evohome, but in HA this zone is missing actuators, the result is sensors like…