-
Hi Spencer,
When I connect to a scope, I am reading negative pulses. I cannot identify where I went wrong. Is there a way I can change the code to correct this? I tried making my threshold and rese…
-
Hello
I have some issues with building this nice device.all parts were used from the bom list except RGT16BM65DT i used instead IKD06N60RATMA1.
Gerber files used were rev04_normal.zip also with …
-
As a muon scientist, I need the behaviour of the Muon Kicker to be monitored, so that I am warned of undesirable behaviour.
#### Acceptance Criteria
1. parent of #3404
1. parent of ~#3406~
1. pa…
-
Hi
So I built a second unit and everything seems fine. I measured the voltages, following Colin's Youtube video:
The test header (J3) shows around 228V. When I press the PULSE button, the voltage go…
-
record the 256 point pulse height baseline that the quabo is subtracting from each 256 pixel pulse height image,
so that if we ever want to recover the raw data, perhaps because we developed an impr…
-
### Expected behavior
When I'm connected through a VPN I should be able to access the VPN network inside a container.
### Actual behavior
When I'm connected through a VPN I cannot access the …
-
What is the "pythonic" way to redimension all subplots inside of a layout?
I am working with this layout:
:Layout
.Overlay.I :Overlay
.Plot.Correlation.I :RGB [sample,timing_est_…
-
Adaptive (Franklin prefers)? Use star catalog?
-
### Describe the bug
Waydroid refuses to start, I'm running WSL2 on Windows 11.
### Waydroid version
1.4.2
### Device
Linux Desktop
### Operating System
Ubuntu jammy 22.04 x86_64
### Kernel ve…
-
Hi, I have built a cosmic watch and it is displaying a very low rate. I have 29.3 v between the HV and the ground pin and between the no. 1 pin of the SiPM and the ground but it is still not working. …