-
Hi, I tested Stellaris-grlib-driver-Adafruit-TFT-ILI9325 library and work perfect. But, when I connect one sensor to I2C (sensor work fine without TFT library), he doesn't work.
I found the problem i…
-
I found DuePanel 3 weeks ago but it's based on expensive Atmel and firmware quality is not good.
Then I thought what if I rewrite the firmware to STM32 and improve it. A week ago I found your firmwar…
-
Hello, i build a sdrive using a vma412 from Velleman. It's clearly described as using the ILI9341 chip.
Strangely the screen remained white. I tested with other versions and the ILI9325 and RM68090 g…
-
16:11:07.365 -> Read Registers on MCUFRIEND UNO shield
16:11:07.412 -> controllers either read as single 16-bit
16:11:07.412 -> e.g. the ID is at readReg(0)
16:11:07.459 -> or as a sequence of 8-bi…
-
Hi David. I really admire your dedication to Displays and all your work, I have used your library in many projects and they have always worked perfectly.
This time I have a difficult one. and maybe y…
-
Below is the output of a a modified version of the read register file in the examples.
It uses the MCUFRIEND class, and thus my custom wiring.
If i output the tft's id, it is 0xD3D3.
`Read Regi…
-
@prenticedavid hello!
Please help me.
I've changed board from a stm32f103c8t6(bluepill) to stm32f401ccu6(blackpill).
Connected blackpill as bluepill:
```
//LCD pins |D7 |D6 |D5 |D4 |D3 |D2 |D1 |…
-
Hi. can you help me with your lib, i run your examples, but it doesnt work, only white screen, i checked pins, all connected right
-
I'm using ATmega a 3.5" touch screen and a Adafruit LoRa radio as a remote gate and kennel opener. It works like a charm so thank you for providing all the tools needed to make it happen.
But now I …
-
Someone was going to start?