-
Is this logger type supported?
I have Sofar Solar inverter with this logger.
Auto search find my logger ip and serial, send packet but after few seconds i got timeout and no response. Tried to s…
-
Hello not being able to read any data from my Infinisolar V II WP 5Kw inverter I asked the store for the protocol used and I am attaching the pdf. I don't think there is in your mop-solar you could im…
-
root@raspberrypi:/usr/src/mpp-solar# mpp-solar -c QPIGS -P PI16 -p /dev/hidraw0
Parameter Value Unit
grid_voltage 221.8 V
…
-
hier is my output:
`mpp-solar -p C8:47:8C:E5:1D:B1 -P JK04 -c getInfo -D`
```
2022-11-22 17:59:58,186:INFO:__init__:main@218: Solar Device Command Utility, version: 0.14.1
2022-11-22 17:59:58,186…
-
Hello,
could you please implement Voltronic Hybrid 10K Inverter?
All information about this could be found here: https://github.com/riogrande75/infinipoll10k
Thank you and regards,
Chris
-
Hello,
Do I need first Install GCC on Raspberry Pi and build C++17 programs ? I used this guide below but not sure how to compile the inverter tools. Could you please provide the exact commands to …
-
I have an inverter model as in the title. I connected it with HA via Nodemcu V3 ESP8266 and RS TTL MAX3232cse converter. I connected the TX / RX pin with ESP to the RX / TX converter. Then I connected…
-
Hello,
I have a question, if you think your SolPipLog will be able to read data from MPP Solar and Sacred SUN Lithium BMS - https://www.sacredsun.com/Product/Battery/2020/1117/Energy-Storage-Lithiu…
-
I followed your procedure but I must make several errors because it does not work.
I manage to extract the information from the BMS but the database remains empty
can someone help me?
`pi@raspb…
-
Hi,
I have a problem firing it up. I have SKYMAX Inverter, same as Infinisolar, only case is orange not green.
Downloaded software, and when i try to run it:
pi@raspberrypi:~/isv $ sudo ./isv --ge…