-
I've followed all instructions on the Readme and the screen doesn't even pretend to flash. I've tried all three files. It just boots up normally with the stock firmware. This morning I found a reddit…
-
Your firmware is for the Ender 3 V2, does it also work with the normal Ender 3?
Greetings Chris
-
Is this repository abandoned? Does development continue elsewhere?
-
Hello
I have an issue with the filament run out.
I am using E3V2-2.0.x.17-Fast-5x5-180321 version
cable checked metered etc.
The issue is that it cleans nozzle
Then goes to print and the ru…
-
I have a Creality Ender 3 v2. When using a SD card extender like this one:
https://www.amazon.de/gp/product/B0855DBVXF
Changing the SD card when the device is switched on, is not recognized.
Ther…
ghost updated
2 years ago
-
hi Jyers, i have an ender3 v2 with V4.2.3main board,ican't find any firmware.
and i find the different between 4.2.2and4.2.3 from marlin documents
/**
* CREALITY v4.2.3 (STM32F103RE / STM32F103…
-
### Description
Hi, when i cancel a print on the display the nozzle will everytime try to go Z25.
If the print is already higher than 25mm it crashed into the print.
### Steps to Reproduce…
-
Hey guys
Running **E3V2-UBL-BLTouch-15x15-HS-v4.2.2-v2.0.1** and **OctoPrint 1.7.2, Python 3.7.3, OctoPi 0.18.0**.
I am having some strange issues with the progress % on the printer LCD. I have …
-
I use :
[E3V2-UBL-BLTouch-10x10-v4.2.2-v2.0.1.bin]
(https://github.com/Jyers/Marlin/releases/download/v2.0.1/E3V2-UBL-BLTouch-10x10-v4.2.2-v2.0.1.bin)
### Description
When i create…
1achy updated
2 years ago
-
Pla warm-up after.Sd when I click on the card, it reset and gets cold.It started to happen after version 1.3.5.My card is 4.2.2.https://user-images.githubusercontent.com/70408762/128607867-c2eb2e4b-b3…