-
PIO Core Call Error: "Resolving lilygo-t-display-s3 dependencies...\r\n\n\nUnknownBoard: Unknown board ID 'lilygo-t-display-s3'"
-
Hi there 🙋🏻‍♂️,
I don't quite understand this bit in the example yaml.
```
output:
- platform: ledc
pin: GPIO38
id: gpio38
frequency: 2000
light:
- platform: monochrom…
-
The t-display is fairly new and has some potential. Didn't know if you were going to look into this device. Unfortunately I'm more an operator and trying to learn microcontroller programming.
-
Hello,
i recently bought the T5-S3 4.7" (https://de.aliexpress.com/i/1005004647326743.html), but couldn't get it to work:
- I installed the arduino-esp32 package and updated it to th version 2.0.3
…
3eppo updated
2 weeks ago
-
hello im use LILYGO esp32 can but when include library not done . this massage Error: 13 INTERNAL: Library install failed: moving extracted archive to destination dir: library not valid
-
Hi,
I was able to successfully build und flash an ESP32-S3 with octal-SPIRAM, but I am not able to connect to the board after flashing the firmware. I think I am missing something, but maybe the sp…
-
The T-Deck is an ESP32-S3 board in a semi-blackberry form factor with a BB keyboard, an (ST7789-compatible) display, power managment, optional LORA, i2s, microphone and some more, but no uart-to-usb a…
-
The read me links to a lilygo product that looks like it is sold out.
Have you found a similar esp with lora onboard, hopefully with a similar protective enclosure?
-
### The problem
I have four of the Lilygo/TTGO T-camera ESP32 boards with OLED and mic purchased from [AliExpress](https://www.aliexpress.us/item/2251832782369013.html), albeit not using the I2S mi…
-
hi,
i have the amoled board that as been sent for content creation by your team but sadly i cant make screen work with firmware that was made on v1, the lvgl example work pretty good but the way to …