-
It seems that newest LinuxCNC 2.8 changed axis names. NGC’s looking for example for axis2 and LinuxCNC newly named it AxisZ
-
## Here are the steps I follow to reproduce the issue:
1. open stepconf
2. configure stepper for at least one axis
3. click "test this axis"
4. in the dialog that opens, press *any* button
…
-
insmod is not load rt comp tpmod_scurve_skynet.so
undefined symbol: am_init_ptr
Machine configuration file is 'axis_mm.ini'
Starting LinuxCNC...
(time=1709706102.202392,pid=134675): Registeri…
-
Many benefits. Initial technical assessment concludes that it's possible.
See here why it's important:
https://forum.linuxcnc.org/38-general-linuxcnc-questions/51816-esp32-s2-s3-linuxcnc-controller-…
-
Can we still use this on LCNC with Python 3.7?
-
See https://github.com/LinuxCNC/linuxcnc/commit/3d926d87f14ada9dea313c2989ee8f24f0e54e0c#commitcomment-128575575 for disussion.
-
I'm unable to get the menu option for overriding limits to work.
It's visible in the top menu but nothing happens when I click on it.
I found a post from 2021 on the LinuxCNC forum describing th…
-
Hi
I am trying to compile the adapter for LinuxCNC. I have a fresh environment installed using their downloadable ISO file.
I was able to clone the repository and attempt to `make` it. At firs…
-
## Here are the steps I follow to reproduce the issue:
My machines, z homes first. Then x any y together. Noticed this issue when my z stepper wire broke.
1. Unplug the stepper wire going to…
-
Hi guys,
What are the real terms of your license? I hope that you will change it, such that you are compatible with the Linuxcnc license.
I only see a one sentence copyright statement in some of your…