-
Hello,
I am not able anymore to connect to my Lopy using Pymakr and Atom.
### Versions
Pymakr : 2.1.13
Atom : 1.57.0
Pycom Expansion board : 2.1A
Lopy : 1.0r
When I connect the board to …
-
Hello,
Here is my material :
- Pycom expansion board v2.1A
- Firmware : (sysname='LoPy', nodename='LoPy', release='1.20.2.r4', version='v1.11-ffb0e1c on 2021-01-12', machine='LoPy with ESP32',…
-
Please include the following information when submitting a bug report:
* The Pycom board you are using (e.g. WiPy 2.0, LoPy).
LoPy L01 OEM
* The firmware version you are using. You can get it by …
-
I used the Pycom Firmware Update Tool and upon install of software my FiPy device now has LoPy software on it so I can not use the LTE module or SIM card on my device. The board shows:
`(sysname='L…
-
Hello,
I use a lopy module with current version : (sysname='LoPy', nodename='LoPy', release='1.15.0.b1', version='v1.8.6-849-baa8c33 on 2018-01-29', machine='LoPy with ESP32', lorawan='1.0.0')
I'm t…
crc16 updated
4 years ago
-
Please include the following information when submitting a bug report:
* The Pycom board you are using (e.g. WiPy 2.0, LoPy).
* The firmware version you are using. You can get it by executing the …
-
Using LoPy:
```
(sysname='LoPy', nodename='LoPy', release='1.9.2.b2', version='v1.8.6-796-g489fa
fa0 on 2017-10-15', machine='LoPy with ESP32', lorawan='1.0.0')
```
If i do:
```
import builtin…
-
* System configuration:
* Pycom board: LoPy1.0r (with deep sleep shield DS v1.0)
* Firmware version: (sysname='LoPy', nodename='LoPy', release='1.17.5.b6', version='v1.8.6-849-56d00234 on 2018-0…
-
In initial testing of the nanogateway the LoPy hangs periodically. I wired up the TPL5010 hardware watchdog which is tickled (P9) when the gateway receives UDP traffic from ChirpStack.
-
LoPy-4 version V1.8.6 2019/05/15, rel 1.18.2.r7
issue on deepsleep: LoPy-4 does not wakes up spuriously from deepsleep. All 7 LoPy's with this setup show this problem.
Sometimes means after many d…
teusH updated
5 years ago