-
When running the installer I get the following errors on the multitech aep (I followed [this](https://www.thethingsnetwork.org/docs/gateways/multitech/aep.html) setup description):
```
Stopping exis…
-
Would it be possible to add support for this gateway, and new chips? Current provided packet forwarder and LoRa libraries sources are provided in [this rak2287.tar.gz file](https://github.com/kersing/…
-
Right now the Diagnostics container waits for information from Packet Forwarder and it does not use a timeout logic. Hence a potential problem in Packet Forwarder would cause the Diagnostics stall in …
-
After a CTRL-C, the process is normally stopping. However, after termination of downstream thread, I get a seg fault. The forwarder has been compiled for an ARM Cortex-A5.
`
*** Multi Protocol Packe…
-
I cannot figure out which pins to set for the reset script.
spi and i2c are enabled.
tyro@rpiz:~/LR1302_loraWAN/LR1302_HAL/sx1302_hal/packet_forwarder $ ./reset_lgw.sh start
CoreCell reset thro…
-
The miner crashes when a certain LoRa packet or a pattern is received. Depending on the region this can happen very frequently:
Attached is a packet capture from the LoRa packet forwarder (the …
-
Hi. Please be kind I'm relatively new to the lora / openwrt subject. So far I managed to get lora-gateway active on my own build of openwrt for the zbt we-826 router. Thanks to your patch I must say. …
ghost updated
8 years ago
-
When the gateway is not equipped with a GPS module and is configured with `fake_gps: true`, the time information is not added to the "DeviceTimeAns" MAC command specified in [LoRaWAN 1.0.3](https://lo…
-
Hello,
I have installed the **lorasdk** and the **packer_forwarder** on my HT-M01/SPI with RaspberryPI Zero W. I've configured it for TTN EUROPE, and the connection to TTN works fine (connected, r…
-
We are using Sentrius RG1xx LoRaWAN gateway with RN2903A(US) LoRaWAN modules mounted on IMP006 Board and Gotthardp LoRaWAN Network server.
Moreover, we send Confirm up-link messages to LoRaWAN netw…