-
I recently needed to replace my Lora32 board in one of my Moarserino 32s. I ended up with a version 3 board. I compiled version 5 and uploaded it to the V3 board no rpoblem but the screen is blank.
…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [x] I have up…
-
The read me links to a lilygo product that looks like it is sold out.
Have you found a similar esp with lora onboard, hopefully with a similar protective enclosure?
-
### Describe you new feature you'd like
The SX1278 seems to have similar capabilities as the CC1101, and it is available with ESP32 on a single board (LilyGo LoRa32). There is a project (https://gith…
-
Hi
I tried to use an Lora Example provided by heltech on arduino IDE.
Somehow my Boards keep crashing with a checksum error:
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x5 (DSLEEP),bo…
-
So I wonder if i have to have the battery ON/OFF switch set to on or off in order to charge the battery while powered via USB. I am not even sure if it's capable of charging a 18650 plugged into the b…
-
Hello, can someone please tell me how i can configure this library to work with the sx1278 ? any advice ? thank you for advance.
Fbo06 updated
5 years ago
-
### Category
Hardware Compatibility
### Hardware
RAK 4631, TTGOs
### Firmware Version
2.3.6
### Description
I have two PMSA 0031 sensors that are supposed to be Meshtastic compati…
-
### Current Situation
Will rtl_433_ESP work (or can it be adapted) to decode smart meter messages on the ~912MHz frequency range?
This can be done on Windows/Linux using rlt_sdr dongles with the rtl…
-
Actually VBAT is provided to the ADC and should be used as uplink data and for checking the supply voltage.
There is no separate supply voltage measurement by default.