-
Hello,
it seems like my camera ASI715MC does not get found. Any ideas what might be wrong?
- I installed this package via pip
- I installed the mentioned requirments via apt
- I installed the …
-
Hi,
i own a EIZO FlexScan EV3240X Monitor.
**lsusb output**
Bus 001 Device 005: ID 056d:4081 EIZO Corp. EIZO USB HID Monitor
and the EV3240X.txt file
[ev3240x.txt](https://github.com/user-att…
-
**Describe the bug**
USB HID not showing up in lsusb.
**To Reproduce**
Plug in USB HID Arduino
1. Run lsusb
2. Expect to see device identified .'
4. See error
**Expected behavior**
Upon i…
wyleu updated
4 months ago
-
### Overview
3 devices are connected to the computer via USB: the piksi, the dynamixel servo and the Zed2i. Atm the piksi has a config file where you supply it's /dev/ which is something like `/dev/tt…
-
**Describe the problem:**
I've bought the DAPCat and tried to make it run under OpenOCD using the cmsis-dap interface but the device does not seem to be recognized as a CMSIS DAP device.
I tried t…
-
Reference:
* https://github.com/libusb/libusb/issues/1398
As pointed out by @tormodvolden, this is a bug of usbutils and his proposed fix sorted out the issue.
> Isn't this just a bug in usbuti…
mcuee updated
6 months ago
-
## Bug Description
Can not connect to microbit.
## How To Reproduce
Steps to reproduce the behavior:
1. https://python.microbit.org/v/3/project
2. Open new project (demo code is fine)
3.…
-
In this case a diagnostics report totally hung irrecoverably on `lsusb -vvv` despite the timeout. On the same device, regular `lsusb` worked just fine.
-
I have gone through the setup (several times now) and have run into a frustrating problem. When I plug in my tablet and run lsusb I see the entry
`Bus 001 Device 005: ID 0416:a316 Winbond Electronic…
-
刷的Armbian-unofficial_24.5.0-trunk_Onecloud_jammy_edge_6.7.8_minimal.burn.img固件,两个usb插上设备都没有反应,不管是插u盘还是移动硬盘,或者短接usb线刷都毫无反应,执行
root@onecloud:~# lsusb
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation …