-
ok, i'll do
_Originally posted by @arihantdaga in https://github.com/mcci-catena/arduino-lmic/issues/856#issuecomment-1049589491_
Greetings,
I am trying to get onboard with Raspberry Pie for …
-
Hello,
i am unable to compile version 3.6.2 for heltec esp32-s3 v3.1 hardware. I try all 3 possible options in platfomio.ini
halfile = ttgotdongles3.h
;halfile = ttgotdongledisplays3.h
;halfi…
-
Hi,
I have been testing my device under different fail conditions such, in this case I was testing what happens with an ACK is not received on a confirmed packet.
What occurred was that the packet…
-
Hello, can you add region CN470 band code to the source code?
-
When attached to the serial monitor, the logs are flooded with a print buffer deprecation error, here is an example of the logs from boot (DevEUI, AppEUI, AppKey & location redacted):
```
rst:0x1 (P…
-
The library worked fine on Arduino 1.0.6, but after upgrading to v2.0.0 the device reboots on the next loop cycle after calling `Arduino_LoRaWAN::SendBuffer()`. I have a `Lora` wrapper class which sim…
-
DFU is now supported. Need to pull in the instructions from pull request #24.
Split driver description up based on system in use:
1. Windows (as given in #24)
2. macOS (nothing to be done)
3. …
-
It would be convenient to support two UARTs on 461x boards as well.
> Small correction: Only in 4630 and 4801 (To support PMS7003 and RS485 transceiver respectively) we enabled extra HW serial USAR…
-
For me it seems LMiC code in radio.c selecting the PA Output pin of SX1276 is erraenous. Always Pin PA_BOOST is selected. This can cause malfunction, if board hardware does not wire this pin, because …
-
The undocumented flag `ARDUINO_LMIC_PROJECT_CONFIG_H` is used to override the Arduino-specific (and inflexible and unpleasant) default configuration file. This needs to be documented in the README.
…