-
Hi,
I am using your MCP2210 driver with my Kernel 4.4.10 on an i.MX6 design.
I have two MCP2210 in my design, both chips drive SPI devices.
I monitored the SPI communication and found out, that after…
-
If I set config according to `settings-example.h`, I am able to export pin 255 (corresponding to 8), creating `/sys/class/gpio/unused255`. The direction is `in`, but there is no `edge` setting, and I …
-
Hi,
I am planning to use this driver but I wants to perform pin configuration via device tree and not via this utility as configuration may get change based on hardware.
The best way to do this is I…
-
SPI通信を使いpcarduino(mbed)間で定期的にシグナルを送信する。応答がなければsystem及びマイコンの再起動を自動で行う。
-
I used this repo from osx and managed to get a hello world working. But on the windows side it's less painful to use the dll provided from microchip. You can find it buried in here: http://ww1.microch…
-
So I've got some test code running on a Raspberry Pi2:
---
import minishift
import time
import sys
vid, pid = 0x04d8, 0xf517
width = 72
ms = minishift.Minishift(minishift.MCP2210Interface(vid, pid)…
-
Currently it:
- Is missing the Pylon driver requirement. Not sure if we can just include the small Basler driver? Maybe we can link that on the right?
- We need to make an OSX version. Basicall…
-
I am trying to speed up the transfer speeds as they seem to be at lot slower than I expected (4096 bytes in .77 seconds or 43Kbps vs 4-6Mbps) I would expect it to be a couple of orders faster than t…
-
I tried to install the correct drivers(HID) the led does not come on. And when I run this command bfgminer -d? I get : "0 devices listed". I am using Windows 8.1
ghost updated
10 years ago
-
Per your note in the readme file. I use the following for a udev rule and it seems to work for me on ubuntu 14.04 x86_64
```
# NOTE: This udev file will grant read and write access to ALL users,
# i…