-
EDIT: Possible solution for 2 & 3 being tri-state buffer chip, e.g., 74125 (or variation).
1. If we want to use the GPIO pins of the MCP2221 to toggle flash/reset then we obviously have to roll our…
-
**Name of Board**
Adafruit MCP2221A Breakout - General Purpose USB to GPIO ADC I2C - Stemma QT / Qwiic
**Board Architecture (i.e: SAMD51, ESP32-S2, ESP32, ...)**
MCP2221A
**Hardware URL**
htt…
-
mcp2221 has a i2c interface which can be used to access further sensors.
Are there any plans to support it?
-
We should either document how to install the sensors, or link to the Adafruit docs that explain how to do it.
On a desktop/laptop, the MCP-2221 should be installed first. [This guide](https://learn…
-
HIDSharp problem?
# repro code
```cs
using System;
using Microsoft.Extensions.DependencyInjection;
using Microsoft.Extensions.Logging;
using Microsoft.Extensions.Logging.Console;
using Sm…
-
MCP2221 datasheet mentions alternate pin functions in the pin mux module such as LED_URX, LED_UTX and LED_I2C which can be used for visual indication of UART/I2C traffic.
![image](https://user-imag…
fijam updated
2 years ago
-
If I try to start the program with the weight sensor attached there are two beep sounds but nothing visible happens.
The program starts right into the gui without the sensor attached, but with the W…
-
Apologies if this is the wrong place; there doesn't seem to be anywhere else to report alr build server errors.
I had to modify my remoteio and mcp2221 crates for alr 2.0 (pulls #1041 and #1042). …
-
It seems that once hidapi has been enumerated, it cannot detect / connect to new or replugged devices.
I have 2 examples.
First, using the `hid.enumerate()` example code, I have an mcp2221 device …
-
Hi,
Is it possible to use this in node.js?
If possible, it could be very helpful.
Because node.js is easy to handle for me.
If not possible now, do you guide or suggest any tip to upgrade this modul…