-
Hi,
Long time. came accros the Microchip module (BM20), and this guy's repo: [https://github.com/tomaskovacik/arduino ](https://github.com/tomaskovacik/arduino)
These modules also support meta-…
-
Hello,
Currently instead of having a BT module connected, I have an AUX connector for testing. However I hear a constant popping sound, and if I connect the aux cable then it will be attenuated a b…
-
Hi thanks for the good documentation / schematics / descriptions.
I've implemented the project with some success however the constant ticking gremlin is really keeping me from claiming this project …
-
Since I gave up on soldering my CSR8645 into a flying setup, I'm thinking about creating a simple PCB layout. In case more people are interested, I can create a PR once I got around to it.
Also MOQ…
archi updated
3 months ago
-
Interesting! When I start up in SAT mode, the first thing my HU says is this (HEX):
C0 1B 76 0 92 FF
C0 1B 76 1 3 FF
C0 1B 76 2 5 FF
C0 1D 76 80 0 FF FF FF
C3 1F 7C 0 FF FF FF FF FF FF FF FF …
-
So I've soldered the module as the schedule shown (I guess it's the same as for archi's PCB?) and is using the .ino meant for archi's PCB!
But the text does not come through, and I can't cycle throug…
-
Any chance for MD-CHGR sniffing? I'm from NL as well and I got a HU803 in my volvo (S60), so I could provide that. I also have a leftover 603 laying around, and even another (disassembled) 803 with a …
-
Hi.
First of all, it's a great project, it's good to see that you can still get something out of such an old car. I did everything according to your project with minor hardware changes (I replaced th…
-
Hello,
Is it possible to receive the next and prev buttons from the HU with the melbus protocol? I'm planning to use a different bluetooth module (https://www.sunrom.com/get/996418), and it's poss…
-
When reading through the code, I saw that the Arduino lists itself as a CD Changer. I found a document that shows different Melbus functionalities (see the "Appendix Known IDs" section at https://vol…