-
Hello!
Thank you for the great job!
I noticed that BME280 example is based on some arduino and wifi101.
In a project I'm working on, the microcontroler used is ESP32. So I mixed the L…
-
At line 75, there is a digital LP filter that was copied from the original library. `offsetI = (offsetI + (sample-offsetI)/1024);`
However, the original microcontroler is a atmgea328p with a 10-bit r…
-
Hi
I narrowed down the problem to level shifters and I2C.
I2C doesn't work through TXS0108E. I have successfully connected the ESP32 board to STC over I2C and it is working perfectly turning the two…
-
```
What steps will reproduce the problem?
opening any of the examples, trying to use them with a picaxe 08M2
microcontroler
What is the expected output? What do you see instead?
- using any of the …
-
i know this issue happened in the past before but seems like no appropriate answers are posted yet.
i am using mega board with ros. i have lost sync error sometimes. I managed to make it works somehow…
-
Recently released Linux 5.2 [supports](https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=42337b9d4d958daae266dc455a54e3b9f157862a) using a U2F Zero as a hardware RNG device…
-
hi everyone i have just bought my raspberry pico and i wanted to try and learn how to program a microcontroler and i didnt like the thonny ide(and couldnt get it to install micropython on my board) an…
-
Hi,
I'm currently writing my third book around MicroPython (in French) and each time I'm getting trouble to setup the WebRepl deamon on the WiFi microcontroler.
The reason for this is simple... the …
-
Hi, I've tried to use Baudrate 2048000 under Linux (Linux raspberrypi 4.9.35-v7+) with an ST Microcontroler (SPC5) and it doesn't connect.
_### Traceback (most recent call last):
File "Pre_ABC.p…
-
I have a PID algorithm written on TIVA C TM4C123GH6PM launcpad. I want to setup a PIL simulation with Simulink. Simulink will send the error signal to TIVA, the PID will calculate the control signal a…