-
Dear author,
would you exactly tell me how to use those module or wether this module could run successfully? when I install this block by gr_modtool, and run the program of mimoots_ofdm_rx.py,there…
-
Hi,
I've seen that the sampling rate for the BladeRF xA4 is 61.44 MHz.
When I activate two ports using python I've seen that each Rx has 30.72 MHz. Is it normal? Is the sampling frequency split?
…
-
The method currently used to calculate polynomial greatest common divisor and lowest common multiple involves calculating the roots of the polynomials then using logic to determine the gcd and lcm. Th…
-
## Issue Description ##
DL BLER ~50% when Running Ping Tests with 4X2 MIMO but ~2% when running 2X2
- With 2X2 MIMO DL BLER **~2%**: rtt min/avg/max/mdev = 9.922/**19.467**/30.447/4.491 ms
``…
Esawi updated
1 month ago
-
Thank you
-
## 🚀 Feature
Performance improvements to linalg in GPUs
## Motivation
After noticing that one of my functions was running unusually slow and timing line per line I noticed that a batched inversio…
-
Hello, I ran R2I with command:
```sh
current_date=$(date "+%Y%m%d-%H%M%S")
python recall2imagine/train.py \
--configs dmc_vision \
--ssm_type mimo \
--wdb_name dmc_original_${curren…
-
## Issue Description ##
[Describe the issue in detail]
I'm trying to connect USRP B210 with SrsUE on a linux PC to a real commercial 5G gNB NSA mode wireless.
I have the EARFCN of the gNB as f…
-
### Organizacja kodu w plikach
* Dla zachowania porządku, w głównym pliku powinna być tylko funkcja `main()`, ewentualnie definicje jakichś funkcji statycznych.
* Wykorzystywane funkcje powinieneś s…
-
Привет, не планируешь сделать папку в репозитории с уже готовыми спискам, которые будут обновляться при обновлении репозитория?
Меня полностью устраивают списки, которые генерирует скрипт, но, мне ну…