-
Hi. I tried the code as it is mentioned in the example:
// create an empty modbus client
const ModbusRTU = require("modbus-serial");
const client = new ModbusRTU();
// open connection to a tcp…
-
I do have an LWZ 5s plus with the optional [EMI](https://www.stiebel-eltron.de/de/home/service/smart-home/energy-management-interface-emi.html) software extention for photovoltaic optimisation "Eigenv…
-
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:617)
at java.lang.Thread.run(Thread.java:745)
18-04-25 10:12:39 fde8e03be878 INFO [polismath.poller:23] - Polling :mode…
-
## Current Behavior
After a day or so of runtime the modbus binding stops updating (some) switches from OFF to ON.
The openhab command line report the state of the Switch item as OFF:
status IRv…
mbs38 updated
7 years ago
-
Hi,
When I try to read a value of a modbus TCP/IP device directly connected to it with a ethernet cable with the following code i receive the values correctly:
```
// create an empty modbus cli…
-
My setup is two KH10.5 wired in parallel (master/slave enabled) and connected to full stacks of HV2600 8* batteries per inverter.
The inverter and batteries are all on the very latest firmware using …
-
Step 1 - wired into modbus using an ethernet cable 1 twisted pair (pin 3 and 4)
Step 2 - wired into modbus to ethernet adapter connecting relevant cables to A+ and B+
Step 3 - confirmed modbus is a…
-
**Bug Report**
The VLS motor Error shows up when the limit switch is hit. The reset command does not reset the error.
![image](https://user-images.githubusercontent.com/42284230/100807031-71d1c6…
-
for example:
E3/DC S10 - Holding Register 40088 (WallBox_0_CTRL)
for controlling a Wallbox via Modbus-TCP, "Bit 0 to Bit 12" can/must be set with Function 05h (write single coil)
**How** can/must…
-
I am using libmodbus 3.1.6 and have the situation, that my modbus RTU slave application answers to requests for address 1, even though it has address 10.
Debug output:
```
Waiting for an indica…