-
I would really like to thank the author of the development. This is the only development that works with idf framework without arduino. This ability have to be shown on the top of the readme.
Never…
-
Is this library compatible with OpenTherm/Lite (PWM Control)?
-
I ordered the "small" version in the Tindie-shop, and I 3D-printed the case "[HeishaMon normal case.stl](https://github.com/Egyras/HeishaMon/blob/master/HeishaMon%20normal%20case.stl)". This case is m…
-
Opentherm smartpower allows thermostats to ask more power from the slave. This is not in the code yet.
It uses same schematic and is only software based. In fact, it is just swapping the low/high log…
-
Just a generic question. I have made an adapter board for the wemos d1 mini. With the adapter it is possible to control central heating with multiple setpoints and to read states from the boiler. I ha…
repa6 updated
4 years ago
-
### The problem
I have issue with OpenTherm (OTGW) integration.
It uses socket:// to connect to gateway and I see warning in logfile:
`2024-05-16 15:30:33.962 WARNING (MainThread) [homeassistan…
-
Ссылка на устройство https://v2.sprut.ai/catalog/item/nevoton-sluz-opentherm-modbus
Для адекватной работы возможно добавить как 2 термостата, или на основании топиков создавать виртуальные устройст…
-
### The problem
I have a group ("sensor.temperatuur_woonkamer_helper") with 3 temp. sensors. 1 aqara, 1 hue, 1 from HA opentherm_gw integration ("sensor.room_temp_thermostat_otgw").
I noticed an…
-
I am using the branch with numeric override ability, but not sure how that is supposed to work. It seems only messages from thermostat can be overridden. I want to override the answer from the boiler …
-
Managed to compile and install this integration. The I get the following error as a loop:
```
[06:04:48][W][opentherm:195]: Received invalid OpenTherm response: 0, status=3
[06:04:48][D][openth…