-
Would be nice to have an option to sync sleep timers.
Currently key presses on a peripheral keeps the central awake but not the reverse. I imagine with a multi-peripheral setup (e.g. with a dongle) k…
-
My testing code is basically same as the RMT example , but remove the final `PulseCode::default()` from data. And some logging and delay are added.
It turns out that as long as I remove the final …
-
Hello,
multiple vendors (keil, ST, etc...) refuse to include the core peripherals in theirs SVDs, claiming that it is arm's job (see https://github.com/posborne/cmsis-svd/issues/28) even arm relyin…
-
I am writing an application for the ESP32 using the CAN protocol. I have used the esp_hal::Twai crate for this implementation. However, I am facing an issue with CAN message transmission. The byte arr…
-
Heya,
I'm wondering how to speed things up for an application that will likely need full-screen updates most of the time.
I have an [ESP32-C6-DevKitC-1](https://docs.espressif.com/projects/esp-d…
-
Po veľa chybných odoslaniach skript padne s errorom "UnboundLocalError: cannot access local variable 'response' where it is not associated with a value" na riadku https://github.com/BUT-DRONE-RESEARCH…
-
In the `2024-10-16` build of the RP2350 Datasheet, under [Section 2.1.3 Atomic Register Access](https://datasheets.raspberrypi.com/rp2350/rp2350-datasheet.pdf#2.1.3.%20Atomic%20Register%20Access) ther…
-
GPIO needed for "enable" signals, i.e. camera module
-
Hello!
I am looking at developing for a no_std environmet and I would like to use this library.
There is good flexibility with the `ReadBuffer` and `WriteBuffer` generics but its locked into usin…
-
**The Problem To Be Solved**
[System Description Files (SVD)](https://open-cmsis-pack.github.io/svd-spec/main/index.html) files provide information about the device peripherals. The DFP (device fam…