-
Need configuration code for sounding piezo alarm
. pin number alarm is on
. frequency (Hz)
. length (ms on/off)
Tie to issue #3 eventually by having different patterns based upon the above settings t…
-
Hello,
I also need a device similar to the Lucchi meter for an experimental project, and I was very pleased to see your work. However, I have an issue with the receiving sensors. What is the operatin…
-
Piezo lag correction in:
https://github.com/jlopezalo/PyFMRheo/blob/62c11c7075c514f6a79d1007de81194be8bda8e5/src/pyfmrheo/models/rheology.py#L41
What happens if the frequency of oscillation is…
-
Hi,
if I understand correctly only DC and Stepper motor controllers are currently supported with Kinesis in the motorThorlabs module. I'm working on an application where I need to integrate a Kines…
-
The spacing on the pins isn't right for the part on the BOM; also lacks a resistor or some other driver since it's not self-oscillating.
-
I will need to implement shortly a driver for an Attocube ANC300 Piezo positioning electronic system. And to avoid doing it twice it would prefer to do it directly with lantz. Does anybody else use th…
-
It would be nice to see if we could retrieve the units from the controller for Physik Instrumente stages. Would need to look at the manual, but the units for the E.709 piezo are by default not microns…
-
Thanks for this awesome project!
Do you know where is find a "piezo voltage conditioning board"? Which would you recommend?
-
Moin, ich bin einfach mal so dreist und schreib hier auf Deutsch:
Erstmal schön, daß mein Bondtech-Adapter für Kakadus Druckkopf so gut ankommt :-) Daß ich bein Einbau meiner Kugellager für die Zah…
-
I just updated by weather station (wittboy GW2000A) to the latest version 2.2.3.
And now I did't receive the rain piezo data.
Does anyone else have the same problem?
I am not 100% sure if the sen…