-
- Version of `ssd1306` in use (if applicable): Unknown
- MCU/other hardware in use: GD32VF103 (PINE64 Pinecil), QUG 9616TSWCG02
- Display resolution and interface: I2C, 96x16
## Description of th…
-
MacOS Ventura 13.3.1
- build from code, shows as 0.4.8, note that I installed gcc12 as that was highest gcc available in macports
**Working:**
- v1 update works.
- dark/light screen
- asia…
-
If I plug my pinecil into a dumb non-qc non-pd output like my pc.. the pinecil fails to power the heater circuit because 4.98V is 'undervoltage'
When connected to my phone which does pd negotiation…
-
Minor things. After it did it's download it just sat there. I'm hunting around and see it says Pinecil Connected. I wish the Install Update button was highlighted or something. I did find it. May…
-
After updating to 2.21.5d96470 with MacBook Air M2 with a USB-C cable directly connected between the devices, the Pinecil boots briefly, shows a 5.1v level, then crashes and reboots continuously.
T…
-
Issue
- no contrast in the colors makes it hard to find the drop-down and sections
- organize for usability
Proposal
- add box frame around the drop-downs sections to show them
- simplify na…
-
**Describe the bug**
Pinecil v2 plugged by standard orange USB-C cable to Samsung PD charger EP-T6530 in socket with PD reboot since temperature higher than 100 °C. Try on original Apple PD charger —…
-
i am getting this issue while flashing the firmware on pinecil v2
-
**Describe the bug**
Pinecil (2.17 European firmware) reboots constantly when plugged into USB-C (Thunderbolt 3) port on a laptop. This didn't happen before the last update. I know the power from the…
-
A few suggestions, intended to be helpful.
1) Don't use acronyms (like DFU) in the instructions. Keep the instructions direct and clear. Average users (like me) have no idea what DFU means.
2) Cha…