-
I am trying to get this board working on ESPHome within Homeassistant but I am having some issues. Can you please clarify the pinout of the PCB (there seems to be conflicting information on the amazon…
-
Hey ESH,
May we get a graphic or similar showing what pins of the ESP32 go to each of the pins on the Presence Lite? PJRC kills it at this with the [Teensy 4.0 pinout cards](https://www.pjrc.com/te…
-
We cant use pin labeled NC in klipper like EXP1_1, EXP1_8.. while in other board all pin have number wether it non used so we can use it for other purpose.
j0e57 updated
3 months ago
-
I can't quite follow the schematics vs pinout table.
For instance on the left side, following the yellow and orange wire, they correspond to GPIO14 (TMS) and GPIO11 (SD3) according to the ESP32 D1 …
-
Hi building one of these for use as a hat. I will use on board microswitches for now but hope to design a case with external buttons eventually. J6 seems to be for this purpose, but I can't seem to …
-
All the languages other than English give a 404, except Italian (https://it.pinout.xyz/), which appears to have been hijacked and shows a slot machine ad.
-
Looking for some help with board selection.
I found a LOLIN32 vs LOLIN32D, would the pinout be the same, as I tried with no luck. And also having issues finding the exact board in VS_code with Pla…
-
When comparing the pin-out diagram and your supplied yaml file some pins need some correction in the diagram. Yaml file for mist pin: gpio3 but there is no reference on the pinout.
-
Schematics pinout is all mixed up for U1-U3. The chips are kinda similar to LM5113, but some pins are missing and others are mixed up. Also this chip is not for new designs.
-
Building with the default configuration works fine. That said, when changing the pinout in CubeMX (e.g., enabling I2C1) regenerating the code throws several errors as shown below regarding lora_app_ve…