-
Hi, it's me, again. :-)
Due to the creation of many cloudnet plots for side-by-side comparison with different radars, I started adding some extra information:
- a copyright notice in the bottom le…
-
Hey @thgeorgiou ,
at Mindelo (Cape Verde) we have a PollyXT system running, which has a 355, 532 and also a 1064nm depol-channel.
Locally at our server I managed to add the missing lines to the poll…
-
In case of power failures etc. it can happen that the netcdf is kind of corrupted in the last entry:
![grafik](https://user-images.githubusercontent.com/55800803/221779426-259f59a8-d3e4-4aea-afac-427…
-
Is the overlap function calculated at each profile?
When looking at the output, I can only find one overlap file for each 6-hour period, e.g.,
```
/data/level1a/polly/PollyXT_LACROS/2020/08/20/20…
-
When working with the new pollyxt_pipeline version 1.12.0 it sometimes gives me the following error:
```
ValueError
Positive and negative calibration cycles have different lengths: 7 vs 6
…
-
Hi, as for several polly systems the depol calibration times are different:
Is there a way to adjust the depol calibration times? I.e. not fixed to:
02:31 to 02:41
17:31 to 17:41
…
-
I am trying to get the processing chain running on one of the servers in the containers,
but the database drivers cause some issues.
With matlab2014 I get:
```
>> >> >>
____ _ …
-
### Status quo:
in level1a of polly measurements every folder name has upper- and lower-case characters
### Goal:
in level1a every polly folder must have every folder-name with lower-cas…
-
We recently recognized that our processing chain stops working when using the dev-branch at its actual commit position (https://github.com/PollyNET/Pollynet_Processing_Chain/commit/11f3046161f229c95da…
-
When a depol. calibration takes place, the `raw_signal` data for that period do not make any sense in the data file, which causes bad products from SCC. Right now, we set this period to NaN but that i…