-
when reading PSSE RAW file version 33 using parse_file, the following error is thrown:
`ERROR: KeyError: key "CONVERTER BUSES" not found`
Below is an example of the VSC data that generates this erro…
-
According to the PSSe manual `NOMV2 is present for information purposes only; it is not used in any of the calculations for modeling the transformer. NOMV2 = 0.0 by default.`
When CW = 3 this cause…
-
In transformer blocks, the K parameter indicates the bus to which the third winding is connected. If the transformer is only two-windings, the parameter should be zero but somehow I got myself a .raw …
-
When I run the command:
``` python
omc.sendExpression("getComponentModifierValue(iPSL.Examples.DevelopmentExamples.Electrical.Machines.PSSE.GENROE,pwLine.X)")
```
I get a parse exception but when I …
-
您好,代码有对应的参考文献或者说明文档吗,谢谢。
-
Hi @dietmarw and @marcelofcastro
I had a meeting with one of our users, Prof. Massimo Ceraolo, @max-privato , he provided me the following valuable feedback.
These are my notes, @max-privato, cou…
-
In the PSSE reader switch shunt `b` values should be converted to p.u. to be consistent with fixed shunts.
-
I have a PSSE .raw file where one of the transformer data blocks looks as follows:
```
1061, 10602, ,1, , , , , , , 'XXXXX' , 1, 2 / load
0, 0.7, 9999
0.955, ,0, 9999, 9999, 15, 1, 10602, 1.04, …
-
The library still has some "check" errors on the following models:
- iPSL.Electrical.Machines.Eurostag.DYNModelM1S_INIT
- iPSL.Electrical.Machines.Eurostag.DYNModelM2S_INIT
- iPSL.Electrical.Controls.…
-