-
Hello, Mr. Joshua,
I have been trying to understand how the Device Tree Overlay for PWM works on the Radxa 3W board in recent days.
I know it works correctly in the official Radxa distribution c…
-
fresh image of either 22 or 24 ubuntu with a wifi connection (managed by either system.networkd or network-manager) will have periodic wifi disconnects on radxa zero 3w. the network manager loads the …
-
### Describe the bug
CH340B, USB-UART chip, used on E25 for serial console is unstable with 1.5Mbps.
for example, if you press and hold enter key on the shell, you can see some letters from command …
-
note: as also mentioned in the [video](https://www.youtube.com/watch?v=l30sADfDiM8&t=581s) this project is based off of, command required in config.txt to activate the peripheral.
-
as described in the title, can an image made available for the radxa zero 3w with a rpi cam v2
or some explanation on howto create the gstreamer packages stack to make it possible. and/or some hints…
-
It's broken recently
```
drivers/net/bonding/bond_alb.c:1375:13: error: conflicting types for 'bond_tlb_xmit' due to enum/integer mismatch; have 'netdev_tx_t(struct sk_buff *, struct net_device *)' …
-
有的设备树节点缺少了比如`#clock-cells`的定义,会在编译时警告。这个因为dts有对应定义,实际上使用是没有问题的,但我们之后会打算增强dts的检查,所以现在先把这些简单的问题修复了
-
First of all, I deeply respect all the work you have done for Rockchip Ubuntu. It is a massive accomplishment!
Your OS is much better and faster than the Debian of Rockchip.
One request. If you ca…
-
link point to https://wiki.radxa.com/Rock3/downloads
-
* Add radxa zero 3e to official support (it is currently supported after testing)
* Add more network card chip drivers, such as RTL8812EU, RTL8814AU, RTL8812BU
* Add lrzsz, net-utils packages
* Aut…