-
### Hardware Info
- Raspberry Pi 3B+ 1GB
- 0bda:2838 Realtek Semiconductor Corp. RTL2838 DVB-T
### Software Info
readsb version
```
readsb version: 3.14.1595 wiedehopf git: a25f8ea (committed:…
-
可融合dump1090或readsb
-
How do I configure readsb to connect to an rtlsdr device by serial number?
I saw somewhere to change --device 0 to --device <serial number> in /etc/default/readsb
When i do that, "systemctl …
-
This is my output:
curl -L -o /tmp/axupdate.sh https://adsbexchange.com/feed-update.sh
sudo bash /tmp/axupdate.sh
Installing mlat-client to virtual environment
34
Error: Command '['/usr/loc…
-
Hi Ketil,
Based on my experience with Stratux receiver, I thought it might be useful to add GPS module support to your project.
For example VK172 USB or similar module for GPS/GLONASS. It cost ±5…
-
Hi,
i tried readsb today in a docker VM inside Proxmox.
This allows me for easy backup and has several other advantages.
USB passthrough works.
But readsb cannot read the CPU Temp. Therefore, i g…
-
Using readsb (dump1090 fork) but i get "404" and some
-
Installed gpsd at my rpi and have a GPS module,can auto use gpsd reported position for readsb?
-
When in a place where a gain of 49.6 so overloads the SDR that it gets not messages at all, the script will keep sitting at the highest value and not progress.
The obvious solution would seem to be t…
-
At a local airport we have an ADS-B receiver, but it is swamped by strong signals. Of course we could reduce the (optimized) gain, but then planes further away will not be received.
I don't know how …