-
Hi I would like to run your modified firmware on a melzi board with reprap full graph display but I can't compile the firmware correctly, arduino ide always gives me errors. Could you get me the preco…
-
I've got reprap firmware loaded on an SKR-2 and connect to it via YAT no problem. When I try to upload wifi firmware to the ESP module(s), I either get an failure to connect error at different baud ra…
-
### What happened?
There was an issue with printtime. Is different on gcode flavor
printtime for "Standard 20mm calibratin cube" gcode flavor "RepRap Firmware/Sprinter/Lerdge" 1h35m
printtime for "…
-
More questions from a n00b, sorry. There are references to servo settings in the processing sketch and in the RepRap firmware, but it's not obvious to me how to hook up the servo to my RAMPS
-
### Is your feature request related to a problem? Please describe.
When a printer uses clams to hold the bed plate (or whatever other irregular "obstacle"), if not being careful the nozzle can hit …
-
![IMG_2441](https://user-images.githubusercontent.com/84640882/120015564-be880a00-bfe3-11eb-8f5d-1a7f6b33eed6.JPG)
Hello, My question is very simple. How to connect and how to configure the Creal…
-
Hi, When I attach the SKR3 EZ to my computer with a USB cable, I cannot communicate using YAT (among others) as no COM port is created. The indicator lights show that the RepRap firmware has been in…
-
Hi have just set up a mega with a 2 differant ramps 1.6 boards and the 20x4 reprap controller.
I have succesfully loaded the firmware on . all the parts have been used and I know there working
no mp…
-
![02](https://cloud.githubusercontent.com/assets/23012115/19626178/36646f86-9966-11e6-8593-ae3df70176d4.jpg)
I have Tevo tarantula with BLtouch. So, I thought this is perfect firmware.
However, the s…
-
For printers using only the Z probe for Z endstop, it's important to be able to inject G-code before homing occurs. On Marlin, a safe Z is defined while in RepRap firmware, macros for different printe…