-
**Describe the bug**
There's been a lot of GPS jamming observed on radiosondes out of Finland lately (well, really all over the place, but I'll use the Finland launches as an example).
If you take …
-
When you put the LPC in flight mode with the RS41 disconnected (presumably also if the RS41 has failed) then the LPC reboots. I suspect this is due to a timeout in the serial read from the RS41.
-
Reported by Matt 06/17/2024:
* The RS41 pressure, when decoded, is off by a factor of 2 too low. It looks like this is occurring somewhere in the encoding process of the RS41 text string
This is…
-
I ran into some issues today trying to flash a RS41 with a genuine ST-Link/V2 programmer instead of the 3rd-party clones I have used before. When trying to flash using openOCD i got the following erro…
-
Hi Edouard , nice program for SDR , probably the best i ever used on my PC !
Decoded RS41 probes perfect, is there any chance to add M10 , M20 , DFM09 for decoding in program ?
Thank you very m…
-
Is there a sample config.h where the si5351 board is running? I conncected a board to pin header of RS41 Ports 2 SDA and 3 SCL - see 3,8 volt on the VCC on si5351 - also set Si5351 CW on but see no si…
-
devel20231110
After a gap of 20 minutes the last position/velocity was recycled and resent to sondehub.
frame 2101:
```
{
"software_name": "rdzTTGOsonde",
"software_version…
-
and plot data to a map application or pipe gps data out.
https://github.com/rs1729/RS
RS41 is mostly used in Europe.
-
When I download e.g.
```
sondehub --download U1440085 > U1440085.json
```
I get duplicate entries, only the order of the fields may differ, e.g. the first two entries
```
{"alt": 192.99898, "bat…
-
Hi Dave,
it looks like the M20 position and altitude data (from TTGO RDZsonde source) are not correctly parsed.
The corresponding data string on History screen looks ok.
See screenshot for details.…