-
### The problem
When ever code is compiled for the RTL8710BN, and the HLW8012 (BL0937) component is included, the firmware will automatically reset the device when the HLW8012 component is setup. Onc…
-
Hello,
i am using ESPhome to flash my Tekin SP22 smart plug. It has a T102_V1.1 board with an RTL8710BN chip on it. Sadly GPIO PA15, which is driving the Relay is not working. If i change the outp…
-
I have been testing the i2c (Wire) implementation for BK72XX chips (so far so good BTW just jamming it into ESPHome i2c component) and wanted to see if I could get SoftWire working on a Temperature-Hu…
-
### The problem
OTA fails after uploading.
Works fine once immediately after the device is restarted, but subsequent updates will not work unless the device is disconnected from power entirely.
#…
-
First off, thank you @kueblc for picking up the torch on this, and thanks to everyone who contributed in the past, for that is the only way for any of us to Have Nice Things(tm). :smile:
I have be…
-
I tried to flash a RTL8710BN and I couldn't open the web server view to check for the pins inputs/outputs or update OTA.
Also the device was not discovered automatically in the esphome web view. The …
-
## The introduction
As we're slowly approaching LibreTiny's 2nd birthday, it's time for a new v2.0.0 release with yet another refactor... that's how it works, right?
In this issue I'll try to do…
-
Hi
I'm attempting to flash my S3-WIFI-ST stick but I can´t even get serial comms to works.
I hooked up the module to my [FTDI adapter](https://www.aliexpress.com/item/32650148276.html).
Set the…
-
Hey thanks for the great guide you made I really appreciate it. Now for me the question is if it is possible to make the camera Pan and Tilt. I tried this guide https://github.com/fjramirez1987/PTZ-YC…
-
Picked up a pack of these last week, I'm impressed they are 15A and CSA marked for $20 CAD...
Have you had a chance to open one yet? Most of these devices seem to be tuya / Esp based controlled, I…