-
The when using any of the functions of the SCD30 driver on the sensor instance, the program gets stuck. This may be related to using the wrong pins to instantiate the sensor. The result is the same, i…
-
- [x] Add support for the [Sparkfun ESP32-C6](https://www.sparkfun.com/products/22925) aka SparkFun Qwiic Pocket Development Board and SCD30 CO2 sensor
-
**Describe the problem you have/What new integration you would like**
Add forced calibration to the SCD30
**Please describe your use case for this integration and alternatives you've tried:**
…
-
**Describe the bug**
Creating an SCD30 component with a "send every" interval of "every 1 minute", "every 30 seconds" causes the device to not receive the I2C Device Init Request and initialize the S…
-
hi,
i try to send an json string to mqtt like so:
```
const char topic[] = "Hoechst/PHI-Log/data/json";
.....
mqttClient.beginMessage(topic);
serializeJson(doc, mqt…
-
https://github.com/adafruit/Adafruit_CircuitPython_SCD30/blob/72c1ccb3c45d6d5cd005bc0bfd792d8e81fc99cd/adafruit_scd30.py#L225
This doesn't mention the calibration persisting on reset like other param…
-
I really liked this library and as I used it via pimoroni's BME280 library I wanted to write a SCD30 library with it.
But it turns out the SCD30 uses 16 bit addresses and it seems i2cdevice always as…
-
Hi there,
I have a bme680 pressure sensor which is giving fairly stable pressure readings:
![image](https://github.com/paulvha/scd30/assets/5393362/204e06e7-48b9-48be-a3c4-d56a95397aa1)
However…
-
Hello
I am trying to use this cool library on a raspberrypi 4b with circuitpython. I have two other sensors connected on the i2c working ok. My circuitpython i2c interface is setup like so:
```…
-
I've ported my air-quality code from Clue to FunHouse, and in the process looked at what the on-board AHT humidity sensor says compared to what the SCD30 says.
- The AHT onboard says 18.2%RH at 40C…