-
In [the slcan driver in linux](https://github.com/torvalds/linux/blob/master/drivers/net/can/slcan.c); there is no other flow control than what the tty is offering; ie there is no acks or anything lik…
-
The `hw_USBTin` module is speaking LAWICEL to the hardware device. Since `hw_CAN232.py`, the LAWICEL protocol support has been implemented in `can232.py.
IMO the USBTin module should be updated to …
-
Recently I had a look on CAN-over-ethernet as I was forced to do a remote debug of some CAN communication.
I realized that it is not that hard to make basic client of `socketcand` as I was able to do…
-
This isnt an issue with this plugin, more like just some behaviour I noticed. I recorded the can bus using Savvycan and then when I played it back (off the car) it seemed like the adapter wasn't able …
-
This is to discuss some current pain points for use of CAN in ArduPilot and how to resolve them
- DNA requires sdcard, which may not be available (especially as we now support microsd insert after…
-
Hi :-)
i see 2.9 release is out : yssss
what about the can setup scripts ?
do you advice to do the configuration handish, or will there be the magic sreipt available soon ?
best regards
claib updated
2 years ago
-
#### Issue details
I am trying to do an update a pixhawk 2.1 running ardupilot in SLCan mode. I am using local firmware. When I click update the progress bar appears and quickly disappears. The log i…
-
Hi,
as per the title would it be possible to use the ELM327 clones together with these tools?
As far as i can see the ELM327 is providing a WIFI network and via Telnet to port 35000 it is possible …
-
Ive been trying for 2 days now to get anything out of my meatpi-usb, I tripple checked the connections, but neither mqqt not the monitor tab or the webcan.meatpi.com spit out anything, neither with en…
-
Hello everyone,
I have a question for you. Can I use SAVVYCAN with CANable? I think ı can do it but ı wonder , Ultimately CANable is a USB to CAN bus converter adapter.
Thanks for helping.
Bes…