-
Namely, in fsmc mode 8bit with the SPFD 5408 controller, I can't get a display on the screen, only a white screen, no image. This controller in the sequence to write the index register does not nee…
-
1. Under all ESP32 platform, regardless of what is done, the sketch will not compile with the error "PARALLEL_INIT_TFT_DATA_BUS was not declared in this scope".
2. Arduino IDE 1.8.13 was used.
3. T…
-
I have a nodemcu esp-32s and a 2.4" tft lcd shield.
link to board - [https://quartzcomponents.com/products/esp32-development-board-wifi-bluetooth](url)
link to display - [https://quartzcomponents.c…
-
MCUFRIEND (and its clones) displays have a different touch panel which throws everything off the calibrated (with a large enough hitbox to correct for the different panels) values, based on Simkeim or…
-
[Serial TFT 2.4INCH with touch sreen Schematic.pdf](https://github.com/prenticedavid/MCUFRIEND_kbv/files/7027755/Serial.TFT.2.4INCH.with.touch.sreen.Schematic.pdf)
I recently purchased this PCB with …
-
After a lot of research, i didn't find any method to switch off and on the display
my display is a spfd5408 mcufriends version
what i found is https://github.com/PaxInstruments/STM32CubeF3/blob/mast…
-
Split out from: https://github.com/Open-CMSIS-Pack/Open-CMSIS-Pack/issues/10
links to: https://github.com/Open-CMSIS-Pack/Open-CMSIS-Pack/issues/21
Requires a tool that can:
- search for componen…
-
I have some old eBay 3.5" TFTs that I believe are HX8357-D controller based from the output of LCD_ID_readreg
********
reg(0x0000) C0 C0 ID: ILI9320, ILI9325, ILI9335, ...
reg(0x0004) 00 00 80 00…
-
Hello! I have a question about the Esp32 Marauder. In my city, i don.t find a 2.8" display just 2.4" with the SPFD5408 controller(it says that the controller is compatibile with ILI9341). My question:…
-
I'm posting an issue although I have the solution.
Attempting to use an LCD shield (supported by this library) with a Teensy LC I found the LC is not supported, only the various Teensy 3.x boards a…