-
Hello! How can i flash this [NRF24L01 ](http://ali.pub/2w8xg) + [USB SPI CONVERTER](http://ali.pub/4p8to) with ArduinoISP or SPI programmer ?
http://www.elecfreaks.com/wiki/index.php?title=2.4G_Wirel…
-
Hi
So this wired bug is only happens while doing a probing operations with BDsensor not mesh or calibrations.
HW:
Voron trident 350mm
BTT M8P Klipper Version: v0.12.0-61-gb50d6669
BTT EBB36 …
-
I've recently flashed this firmware on a brand new chip and I noticed that depending on the light received by the photoresistor the display flickers. Is that the normal behaviour? In light and darknes…
-
Thanks again for your work on jtag2updi!
In the README.md you mention you haven't tried using a level shifter -- I thought I'd share my results/issues here and maybe add a suggestion.
In all cas…
-
在`FwLib_STC8\FwLib_STC8\demo\rtcrtc_interrupt.c`中定义的中断服务函数:
`
INTERRUPT(RTC_Routine, EXTI_VectRTC)
{
..............
}
`
>- 📝目前Keil各个版本的C51和C251编译器均只支持32个中断号(0~31),后面的中断需要经过添加汇编调整指令跳转实现。
### 🛠调…
-
I got read timeout in 'Trimming frequency ' with device STC15L104W
Without options. Shouldn't it detect this device ?
```
$ stcgal -D main.ihx
Waiting for MCU, please cycle power:
-
Hello,
I cannot get my unit to go into DFU mode. I checked all my connections and I just can't get it to go. I shorted J1 and BOOT0 to 3.3v.
I also checked continuity between my usb pins and the…
-
I want to use this firmware because of critical bugs on stock clock kit.
Since this kit is different from banggood varients, I want to modify pin numbers.
However I cannot change A1~A4 pin numbers o…
-
I'm having trouble compiling. I'm using a RPi with Debian Jessie.
Here is the error after editing the makefile to used sdcc instead of sdcc-sdcc
```
sdcc -c main.c
delay.h:7: syntax error: token -…
-
Can you provide the source code for the v1.2 firmware ( BIGTREETECH-Relay-V1.2/BIGTREETECH Relay V1.2/BIGTREETECH Relay V1.2/Firmware/STC15W201S.hex )?
Whatever language it was originally written i…