-
I'm unable to start a SX130X as concentrator under kernel 6.6.22 on a Pi 4B.
Running reset_lgw.sh, outputs:
`./reset_lgw.sh: 26: echo: echo: I/O error
./reset_lgw.sh: 27: echo: echo: I/O error
./r…
-
[Pixhawk standardní SPI konektor](https://raw.githubusercontent.com/pixhawk/Pixhawk-Standards/master/DS-009%20Pixhawk%20Connector%20Standard.pdf) má kromě SPI signálů pouze jeden další signál, jehož p…
-
I cannot join our devices with SX1262 chips to the Helium network. The same devices joins without issues to TTN and ChirpStack. Also the same devices configured for EU868 region joins without issues t…
-
Hello lbm-team,
We encounter some issues during LCTT testing.
We will be delighted to have feedback on the issues described below.
**Environment**
- ISP4520-EU-ST module (nRF52832 + SX1261)
- …
-
I bought two LoRa nodes from Lilygo, the SX1262-433MHz and SX1262-915MHz. In my actual tests, at all BW&SF combinations (I tested SF6 to SF12, BW from 125kHz to 500kHz), the actual communication dista…
-
Hi there!
I have identified the issue in STM32CubeWL V1.3.0. See here:
https://github.com/STMicroelectronics/STM32CubeWL/blob/main/Drivers/STM32WLxx_HAL_Driver/Src/stm32wlxx_hal_subghz.c#L1000
…
-
# Environment
* NUCLEO-L476RG board
* SX1261MB2xAS shield
* LBM 3.3.0
The example application is modified as follows:
* The `nb_downlink` (`smtc_modem.c`) variable is printed:
```C
uint32_t…
-
Hi, I'm working on an implementation for another MCU and I have some questions/ suggestions.
- How do you plan to differentiate between the MCU implenentations because you can only one in `ApiMcu.h…
-
LongAP One miner
Main board looks like it's this one from PC engines API 2E0 - https://www.pcengines.ch/apu2e0.htm
- AMD processor (apu2e0 = 2 i211AT LAN / AMD GX-412TC CPU (stripped down board)…
-
I have a same issue that previous, but in a different module.
I use a Ebyte e22-900m22s module, that have a LoRa chip llcc68, its seems a semtech 126x.
The data from this devices is [here](https://w…