-
I could need some help with LoRa communication between an T-Beam SoftRF SX1626 and a T-Beam Mashtastic. I tried to use the transmitter and receiver code from:
https://github.com/Xinyuan-LilyGO/LilyGo…
-
had to change to tcxoVoltage=0 because the example code one just fails to run
Send
````from sx1262 import SX1262
import time
sx = SX1262(spi_bus=1, clk=14, mosi=15, miso=24, cs=13, ir…
nwgat updated
1 month ago
-
Hi,
I'm trying to port this library to the SX1262 transceiver (which Semtech are touting as a replacement for the SX1278 etc).
Just wondering if anyone has tried to do this before?
-
LMIC is not campatible with Semtech SX1262 chip.
Do you think to a solution in next future?
-
Hello,
i am unable to compile version 3.6.2 for heltec esp32-s3 v3.1 hardware. I try all 3 possible options in platfomio.ini
halfile = ttgotdongles3.h
;halfile = ttgotdongledisplays3.h
;halfi…
-
Hello,
I've tried to upload firmware to Lilygo SX1262 T-Beam AXP2101 v. 1.2
It doesn't work. Terminal show me this:
[INFO][AXP2101] init done!
[INFO][Main] LoRa APRS Tracker by OE5BPA (Peter…
-
Hello,
I have been using this library on the Lilygo T-Deck and it works great. I also created a tft_config.py which I have added below in case it could be added to the repo:
```py
""" LilyGo T-…
-
Hi I installed tinyGS to my Heltec lora32 v3 board sx1262 lora radio but with 868MHz
I configuration there is no option for 868MHz only 433MHz
![Screenshot_20240415-122906](https://github.com/G4lile…
-
Hey,
Im trying to figure out how and playing around with the waveshare module in combination with the raspberry pi pico, however it seems ive ran into an issue trying to run the sample code:
```
…
-
Since this library does not work with SX1262. Do you guys have any other examples and libraries with Duplex Communication that works with SX1262 and esp32?