-
Like in https://github.com/jgromes/RadioLib/issues/385 (which was fixed in https://github.com/jgromes/RadioLib/commit/9d3807168f0cfed6b2e7e18644b13ee8c549be38) useRfo is needed in other Lora chips whi…
-
I was able to compile fine, but when I run:
sudo PORT=/dev/ttyUSB0 make flash
It looks like it's trying to flash the Evil Crow. Lights on it are blinking. Then, I get this: Any ideas what I'm do…
-
Hi,
I would like to use your software to integrate a Bresser 9602510 (5in1) sensor via MQTT into my system.
I can't get it to work. I already stopped after "Starting execution..."
I followed your…
-
I´m trying to install it on a RaspberryPi Zero W but Make get stuck on:
g++ -o LoRaPktFwrd RadioLib/src/linux-workarounds/SPI/SPI.cpp RadioLib/src/linux-workarounds/dummy.cpp RadioLib/src/protocols…
-
I use module sx1272 on uno and i get failure
> Starting
> FAILURE
> /home/cyryl/Arduino/libraries/arduino-lmic-1.5.0-arduino-1/src/lmic/radio.c:659
-
```
initBoard
LoRa Receiver
C:\Users\USERNAME\OneDrive\Documents\Arduino\libraries\LMIC-Arduino\src\lmic\radio.c:691
```
This is the output I get with TTN_OTTA example on TTGO T-Beam. I did t…
-
# SX1276,SX1277,SX1278,SX1279
- [x] Version is 0x12
- [x] Different *rssi* calculation method
- [ ] low datarate optimization is different
- [x] set_bandwidth is different (different register ma…
-
Is there a certain button combination that puts the Evil Crow in programming mode? Every time I try to flash RFQuack, it fails.
-
Hello,
to start with I ordered and assembled the same Adafruit modules found on the photos on the RFQuack github site:
![494A5A58-01BD-43EA-80A2-702C1E1A7B7F_1_105_c](https://user-images.githubu…
-
```c++
/*
RadioLib SX126x Transmit Example
This example transmits packets using SX1262 LoRa radio module.
Each packet contains up to 256 bytes of data, in the form of:
- Arduino Stri…