-
老师你好，在我尝试LoRa-PHY代码中，我想让代码模仿SX1280（2.4G LoRa)的调制过程，当我更改通信带宽为203kHz(原125kHz)时，会发生计算过程中大小不匹配的问题，请问如何解决这个问题
-
Hello,
I know that it's a old issue, but I try...
@pascallanger, I have two noble nb4, and some FGr4s, and many "clone" from dasmikro (not sold anymore).
A working RadioMaster MT12 with 4in1 an…
-
I believe it may be helpful to document full chip erase methods or add full chip erase option to configurator as a final step prior to making the determination a hardware problem is likely cause of an…
-
Hi,
I tried to get the modules running, but without success. How can I check if the wiring is correct? Maybe a small test-sketch which reads a known register? And How can I produce a signal I can see…
-
HI @CongducPham
I am trying to compile lora_gateway manually for RPI0W2 Board since the existing gateway image wont work for RPI0W and the Raspberry Pi team already released RPI0W2 which is running …
-
Hello, I am having difficulty with configurator manual install of new firmware after swapping old literadio 2 to a new ELRS board. Watched youtube videos and read these threads but to no avail. It is …
-
Hello, are you using the PDM library of ST or are you only using your simplified PIR based on the LUT? i see both in the project.
0x0fe updated
4 months ago
-
I wish to add a backpack to my 2.4 Ghz DIY TXs based on PCB labeled:
2.4GHz
ExpressLRS
EBYTE
v1.0
Please verify my understanding and I will be happy to take images of my install and assist add…
-
请问在调制时为什么称为格雷解码呢
-
On the page
https://github.com/ExpressLRS/ExpressLRS-Hardware/tree/master/PCB/2400MHz/TX_SX1280
after reading everything, I noticed that there is 2 PCB design, and no hint about which one to choos…