-
Greetings to anyone that reads this message.
This Issue is where we coordinate and take bug reports for the effort to improve the 8822bu in-kernel driver. The 8822bu in-kernel driver supports the s…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Hello, it seems that these lines
// wait for TX buffer to free
while ((readRegister(REG_SR) & 0x04) != 0x04) {
yield();
}
and
// wait for TX complete
while ((readRegister(RE…
-
First of all, @qzed thanks for all the work you've already done reverse engineering and documenting a lot of the SAM stuff. It's been quite helpful!
I've been reverse engineering the SP7 SAM firmwa…
-
Have you developed a spec fopr the shield that goes with code? I'd like to build an arduino based EMS and pyEfis for display. This will go in my VW powered Sonerai
-
### Describe the bug
Hello. 2 Days ago i switched my 7430 from FritzOS to OpenWRT.
I expected same or better Internet Performance but this was not the case i got much worse performance.
Current…
-
Приветствую!
Продолжаю разбор полётов здесь.
Оказалось, что всё работает и на 19.07.4. Просто надо было после всех настроек передёргивать питание роутера, а не делать reboot в консоли. Пока до меня …
-
When I put my wifi in monitors mode using the echo command
I lose the p2p0 interface and I can't add any other interfaces
Are there any solution?
![Screenshot_20220401-121542](https://user-images.g…
-
I am using ESP32 with MPU6050_DMP6_ESPWiFi.ino file(The snippet of the mpu_setup() function is here
```c++
void mpu_setup()
{
// join I2C bus (I2Cdev library doesn't do this automatically)
#if …