-
PIO Core Call Error: "Resolving teensy41 dependencies...\r\nPlatform Manager: Installing teensy\r\nDownloading 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%\r\nUnpacking 0% 10% 20% 30% 40% 50% 60% 70% 8…
-
In file included from E:\Arduino\libraries\AttachInterruptEx\src/attachInterruptEx.h:4:0,
from E:\sketch200324.ino:8:
E:\Arduino\libraries\CallbackHelper\src/CallbackHelper.h:4:10: …
-
This is something to look at for Arduino IDE 2.0 support.
USB types are defined boards.txt along with many other parameters. Boards.txt are supplied in the board packages. Boards.local.txt provide…
-
Encountered a strange problem which I cannot find a solution. Linking problem with multiple files that link fine when using FreeRTOS but not with HeliOS.
Made a simple test to verify this issue as …
-
Is there any plans in place for supporting the teensy 4.1?
From what I can tell, it uses the same chip as the teensy 4.0, so I think a good bit of it can is done in #1425.
I'm happy to help with…
-
Rt-thread on Teensy 4.1 ,4.x , please
https://www.pjrc.com/store/teensy41.html
BSP, 4 bit Sdio-sd-card... USB host for wifi, bluetooth, low power mode ...
Any plans ,
Best Regards
-
Hello,
I am using your SD repo as a dependency in my platformio project. When I drill down to the error in SD.h I am told that "FileImpl not a class or struct name"
Where is FileImpl supposed to…
-
On the Teensy 4.1 Version 6 circuitpython, the wrong SD card interface is built in:
https://circuitpython.org/board/teensy41/
The builtin interface is for SDcardio. However, the SDcard is actual…
nezra updated
7 months ago
-
I pulled this for use with your T4.1 Triple CAN board I bought from Copperhill.
It compiles and downloads. I get the "CAN Nominal Configuration" output over serial, but the LCD is completely blank …
-
Having some trouble using the USB Serial on the teensy, while optimizing for code size.
I've been able to reproduce the issue using Teensy 4.1 and VS Code's platformIO IDE on both Windows 10 and Ub…