-
As of Home Assistant Core 2024.9.0, the following error is thrown for the following action:
```yaml
data:
ieee: sensor.bedroom_vindstyrka_pm2_5
endpoint: 1
manf: 4476
cluster: 64638
…
-
### The problem
After upgrade ESPHOME to version 2023.2.4 - all my Air sensors readings goes minimum values.
Normal values eCO2 before update - between 800-1500ppm
Sensor 1
[10:25:51][D][sgp30:2…
-
I am trying to pair the device "lumi.airmonitor.acn01"
My wateway is: Xiaomi Multimode Gateway (CN) --> ZNDMWG03LM (lumi.gateway.mgl03)
"Mi home" does not detect it but it pairs to the zigbee ne…
swas updated
8 months ago
-
SGP30 Unable to Accept Setting Baseline
- Arduino board: ESP32
- Using Platformio 5.0.1 in Atom
**Description**
Before my board powers down, I want to record the latest baseline in order to r…
-
### The problem
The AGS10 sensor requires a bus speed no greater than 15Khz
This setip works perfectly on a standard ESP32 dev board, but on these small ESP32-S2 Mini board (the little purple ones) …
-
[View Post on Blog](https://allanchain.github.io/blog/post/pi-sgp30)
> Connect …
-
See: https://github.com/juergs/ESPEasy_BME680_TVOC
As [mentioned on the forum](https://www.letscontrolit.com/forum/viewtopic.php?p=50809#p50809)
TD-er updated
3 years ago
-
The spec should also contain:
* HCHO (Formaldehyde): Although a subclass of the TVOCs, this is one of the most important poisons in living areas and in fact some sensors are able to distinguish betwe…
-
We set up the hardware and followed instruction for coding microbit at https://techtotinker.com/2023/10/24/brickcell_gesture_apds9960/
Results:
TVOC and Co2eq are undefined and -1.
tvoc: undefi…
-
Tq for the great library. Does it gives only 2 values CO2 and TVOC?
CO2 concentration : 16848 ppm
TVOC concentration : 1075897647 ppb
I think something wrong it keeps giving this value. How many…
mshaz updated
7 years ago