-
* https://github.com/sparkfun/SparkFun_u-blox_GNSS_Arduino_Library/blob/main/examples/Example22_PowerOff/Example22_PowerOff.ino
* https://learn.sparkfun.com/tutorials/gnss-receiver-breakout---max-m10…
-
I wonder if your u-blox can connect with qianxun amount. If so, may I ask about the product type of you use u-blox GNSS module?
-
Device, sample and test app.
Minimum support is current Navio+ NEO-MN8 model but attempt to support Navio (original) NEO7M and NEO-6T dongle if the UBLOX hardware is standardized (likely as their conf…
-
I've been told that `wwan0` doesn't show up on the TOBY-L2, so it never gets configured. This is even though the instructions say to use the `wwan` kernel module. Since I don't have a TOBY-L2, I can't…
-
### SerialPort Version
10.5.0
### Node Version
_No response_
### Electron Version
_No response_
### Platform
_No response_
### Architecture
_No response_
### Hardware or …
-
Sir,
How are you ?
After config
"nsapi.default-cellular-apn": "\"java.com.br.br\"",
"nsapi.default-cellular-username": "\"claro\"",
"nsapi.default-cellular-pas…
-
The u-blox cellular module can work in tandem with a u-blox GPS module through the DDC pins (SDL and SDA, pins 26, 27). Can you consider making those pins available to the outside world through user p…
-
I was looking at the Eagle layout for the Electron and noticed that pins 22-23 in the top right corner of the u-blox part should be labeled 21-22.
![electron ublox](https://cloud.githubusercontent.co…
-
### Description of defect
Opening a PPP connection with the u-blox SARA-R500S, using LTE Cat M1, hangs until it's timed out. I have noted two things:
1. APN logged as response on the `AT+C…
-
This works fine on the released version of "u-blox BLE" in the iOS app store.
I can find no file named "art.scnassets/NINA-B112.obj" in resources?
**Steps to Reproduce**
1) Start Scan
2) Sel…