-
I'm trying to enable the USB-B port while in Standalone mode so that I can run audio in/out of my Linux machine over a single usb cable. My goal is to work mostly on the MPC, but use an audio plugin …
-
### Describe the bug
I have an Alfa Tube UAC2 USB wifi dongle which is mt7610u-based and does not work properly on OpenWrt. 2,4GHz works, but the device never works on 5GHz, several other strange thi…
-
### Operating System
Windows 11
### Board
STM32F401 custom design
### Firmware
Same as https://github.com/hathach/tinyusb/issues/1935
(CubeMX Makefile project on FREERTOS, using the ne…
-
### Operating System
Linux
### Board
STM32F723 Discovery
### Firmware
examples/device/audio_4_channel_mic
examples/device/audio_test
examples/device/uac2_headset
It work's properly…
-
test with DMZ , sngrep run at IPPBX server
UAC1 -> NAT DMZ firewall -> LAN - IPPBX -> UAC2
1.1.1.1 -> 1.1.1.2 / 192.168.1.1 -> 192.168.1.200 -> 192.168.1.222
IPPBX give Answer SDP address same NAT …
-
In the examples, I noted this define: USB_DEVICE_WORKAROUND_AUDIO_20_WINDOWS, confirmed that you can either get it to run on windows, or mac, but not both...
Since an audio class device is expected…
-
Since the 5.18+ kernel UAC supportes multiple samplerates. See [u_audio.h](https://elixir.bootlin.com/linux/latest/source/drivers/usb/gadget/function/u_audio.h#L41).
Would it be possible to support…
-
Hi,
I was reading through the XMOS forum and I found the information that `lib_i2s` currently supports [up to 10 channels at 192kHz/32bits](https://www.xcore.com/viewtopic.php?t=8283), which confi…
-
### Is your feature request related to a problem?
Being able to route lossless audio to/from a computer is super helpful for debugging a very wide range of audio projects (audio effects, speech, AI…
-
sDB structure is
`Timestamp; Serial; PDC1; PDC2; IDC1, IDC2; UDC1; UDC2; PAC1, PAC2; PAC3; IAC1; IAC2; IAC3; UAC1; UAC2; UAC3; EToday, ETotal; Frequency; OperatingTime; FeedInTime; BT_Signal; Status;…