-
### Problem description
This is a Smart Ultrasonic Water Flow Meter with Tuya Zigbee App Control.
The device can be paired with ZHA, but no sensors are available.
The device:
https://www.aliba…
-
**Device normal info**
- Brand: EPT Tech
- Model: Smart TLC2206
**Device info (please complete the following information, which can be found in [log](https://github.com/tuya/tuya-home-assistant/…
-
I was able to run the code successfully but I don't know how to play an ultrasonic sound. I need help.
-
### The issue
The ultrasonic module makes use of a critical section (between PORT_ENTER_CRITICAL and PORT_EXIT_CRITICAL). Within it, it uses active loops (that is, `while (gpio_get_level(dev->echo_pi…
-
**Describe the bug**
When using an ultrasonic sensor, if the echo pin is set to output the sensor still works correctly although, it should be an input
**To Reproduce**
use the ultrasound sensor …
-
-
Write Ultrasonic sensor driver based on DIO, Timer drivers supports:
- change configuration : errorType (ptrUS*, parameterID, newValue)
- change getDistance : errorType (ptrUS*)
- enable : errorType (…
-
The plan is to create cheap ultrasonic anemometer with good stability in all weather conditions and reasonable accuracy around 1 m/s or less.
Unfortunately my knowledge in this area is lacking but…
-
//Function will read analog pin connect to ultrasonic sensor
//That value will be assigned to a global variable. Call it 'brightness'
void ReadSensor()
//Function will use analogWrite to assign t…
-
Need to get the ultrasonic sensor up. Anyone want to have a go at it?