-
Hi, could you please assist with the following issue or provide hints what to try next?
### Problem
Cannot extend SDR range with [official instructions from AD]( https://wiki.analog.com/university…
-
Hey !
I have a little problem. I followed instructions on [this page ](https://www.numworks.com/engineering/software/build/) but it doesnt work (its probably made for n0120)
I use this code to comp…
-
Hi,
I hope someone can help me with this issue. My plutoplus used to work fine until I plugged it into a computer with seemingly insufficient USB power.
Now when I plug it to my Linux box on whi…
-
Hello, this post aims to be more like a "FAQ Space" for most our problems to find solutions.
If you have anything, you can add as a comment, please put #FAQ at the beginning and some texts (tags) tha…
-
Hi.
I have STM32 device in DFU mode, checked with STM32Cube programmer software. I can't find proper command line switches to upload .bin file.
These are commands I executed
`pydfuutil -l`
…
-
I installed Ubuntu Asahi 24.04 on a clean DFU-restored Mac mini M1, and ended up with software rendering:
##…
-
I have a 446 and I can get it into DFU mode no worries. (BOOT0 is fine)
It flashes klipper and reboots into it fine.
But if I remove the boot0 jumper, it just doesn't work.
```
make flash …
-
USB2.0 is affordable and ubiquitous, with peripherals ranging from HIDs to webcams, and more. However, FPGAs typically don't have a good way of direct interfacing to USB (with a notable exception of G…