-
I am using ESP32-S3 DEV KIT N8R8 with esp3d-tft to communicate via wifi with my cnc 3030 prover max (with GRBL, USB port CH340) and the setting is made to communicate via USB SERIAL port. I can send a…
-
> Assertions:
>
> USB-A 2.0 (older square usb ports) always provide power, so most USB-A to USB-C cables should probably work when you plug into a PC or Laptop
>
>
> Newer USB-C ports …
-
This feature request is to add a new "mode" to BlueSCSI that allows it to connect legacy SCSI devices to a …
-
### Port, board and/or hardware
rp2 port, pico 2 board
### MicroPython version
MicroPython v1.24.0 on 2024-10-25; Raspberry Pi Pico2 with RP2350
### Reproduction
This is the script I us…
-
I've similar issues with Arch. My hardware is RPI Pico 2. Flashed with pico-hsm from https://www.picokeys.com/getting-started/
`dmesg` output
```sh
[ 179.413262] usb 3-2: New USB device found, i…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
What would it take for a USB Host Controller driver to be made?
-
### Related area
I would like to have tinyUSB support USB Host on ESP32-S3
### Hardware specification
ESP32-S3
### Is your feature request related to a problem?
I have USB MIDI Host working under…
-
### Please describe your issue.
I have Santroller set up on my Pi Pico board, and am using it to translate my wired Xbox One controller for use on my Xbox 360 via USB host.
This is all working fin…
-
_This is a meta issue for maintainers and developers of relevant subsystems to track progress on new USB support._
## Introduction
Currently we have only USB device support in Zephyr OS. Existin…